Skip to content
One-click app

Tailscale Server

Bring your server into your private Tailscale network: reachable from your devices over WireGuard, as an exit node if you like – installed with one click in the panel.

Monthly cancellable · no setup fee · prepaid

Recommended spec

The optimal configuration

Our recommendation for Tailscale: the cheapest package with the right resources – no minimum term.

1
CPU Cores
AMD EPYC vCores
4GB
Memory
DDR4 ECC
20GB
NVMe Storage
NVMe SSD · Ceph HA
4,99€
Price
Monthly

Minimum requirements of Tailscale (below them the panel refuses the install): 256 MB RAM · 1 GB NVMe

In Detail

Why Tailscale on Your Server?

Databases or admin interfaces that only you use don’t have to sit on the public internet. Through Tailscale you reach them from your devices via the server’s tailnet address, without opening ports for them.

Tailscale joins your devices into a private network, the tailnet: the devices talk to each other directly, encrypted with WireGuard, and reach each other through fixed tailnet addresses. The tailnet is managed in Tailscale’s admin console, so you need a Tailscale account. The panel installs Tailscale from the official repository and signs the server in with an auth key you create in the admin console. The key shows up neither in a command line nor in the installation log. The server’s DNS settings stay as they are, so the server and its containers keep using their existing resolver. If you like, the server offers itself as an exit node: the panel turns on IP forwarding for this, and you still approve it in the admin console. After that your devices can route their internet traffic through the server. For direct connections the panel opens UDP port 41641; if no direct connection works, the encrypted packets travel through Tailscale’s relays.

  • DDoS Protection
  • Location — Frankfurt DE-CIX
  • Storage — NVMe Ceph HA

Features

All Benefits at a Glance

Full root access — install anything

Install any software, any runtime, any version — no restrictions from panels or shared hosting.

Full SSH root access

Connect anytime via SSH and manage your server with full administrator privileges.

Enterprise DDoS protection included

Permanent protection with high-capacity filtering — included free with every server.

Low latency — Frankfurt DE-CIX

Located directly at DE-CIX in Frankfurt for low latency to European networks.

VXLAN private networks

Connect multiple servers in an isolated VXLAN Layer 2 network — separated from the internet and without public IPs.

Runs continuously — no sleep mode

No sleep mode and no shutdown when idle: your server keeps running as long as its term is paid.

Always included

Included with every root server

Enterprise DDoS protection included Full root access — install anything NVMe SSD Ceph HA storage Runs continuously — no sleep mode Low latency — Frankfurt DE-CIX 1× IPv4 + /64 IPv6

All Root Server Packages

Choose the package that best fits your project

Every one of these packages meets the minimum requirements of Tailscale.

RootPaket-2

5,99€ Monthly

  • 2 AMD EPYC vCores
  • 6 GB DDR4 RAM
  • 50 GB NVMe SSD
  • 1× IPv4 + /64 IPv6
  • DDoS Protection Included
View Packages

RootPaket-3

9,99€ Monthly

  • 4 AMD EPYC vCores
  • 16 GB DDR4 RAM
  • 80 GB NVMe SSD
  • 1× IPv4 + /64 IPv6
  • DDoS Protection Included
View Packages

RootPaket-4

19,69€ Monthly

  • 6 AMD EPYC vCores
  • 24 GB DDR4 RAM
  • 130 GB NVMe SSD
  • 1× IPv4 + /64 IPv6
  • DDoS Protection Included
View Packages

RootPaket-5

30,49€ Monthly

  • 8 AMD EPYC vCores
  • 32 GB DDR4 RAM
  • 180 GB NVMe SSD
  • 1× IPv4 + /64 IPv6
  • DDoS Protection Included
View Packages

RootPaket-6

46,79€ Monthly

  • 8 AMD EPYC vCores
  • 48 GB DDR4 RAM
  • 200 GB NVMe SSD
  • 1× IPv4 + /64 IPv6
  • DDoS Protection Included
View Packages

Get Started in 3 Steps

Get Started in 3 Steps

1

Order a root server and create an auth key in the Tailscale admin console

2

Pick Tailscale under “Apps” in the panel, enter the auth key and decide whether the server should be an exit node

3

Check the server under “Machines” in the admin console and turn off “Key expiry” there

  • The install usually takes about 2 minutes
  • Runs on Ubuntu, Debian, AlmaLinux and Rocky Linux

More one-click apps: Vaultwarden · Nginx Proxy Manager · authentik · Headscale · SearXNG · MeshCentral · Mosquitto · CrowdSec · WireGuard (wg-easy) · WordPress

Frequently Asked Questions

Answers to the most important questions

Where do I get the auth key?
From the Tailscale admin console under Settings → Keys. The key starts with “tskey-” and is only needed to sign the server in. So that the server does not have to sign in again after 180 days, turn off “Key expiry” for it under “Machines” afterwards.
How do I use the server as an exit node?
Choose “Offer as exit node” during installation. Then approve the server in the admin console under “Edit route settings” and select it as exit node on your device. Your internet traffic then leaves the tailnet through the server’s IP address.
Does my traffic go through Tailscale?
Tailscale only coordinates: the service distributes the keys and tells the devices how to reach each other. The data itself flows as directly as possible between the devices. If that doesn’t work, Tailscale’s relays pass the packets on, and they stay end-to-end encrypted.
What is the difference from Headscale?
With Tailscale you use the provider’s control server and its admin console. Headscale is an independent replacement for that control server that you run yourself; the Tailscale clients stay the same. Headscale is also available as a one-click app.

Get Started Now

Your server in your private Tailscale network – from €4.99 a month.