Mosquitto MQTT Broker
The meeting point for your devices: Mosquitto relays MQTT messages between sensors, your smart home and your own programs – on your server, installed with one click in the panel.
Monthly cancellable · no setup fee · prepaid
Recommended spec
The optimal configuration
Our recommendation for Mosquitto: the cheapest package with the right resources – no minimum term.
Minimum requirements of Mosquitto (below them the panel refuses the install): 256 MB RAM · 2 GB NVMe
In Detail
Why Mosquitto on Your Own Server?
A broker on the internet connects devices at several locations without you opening ports at home – the devices open the connection themselves. Mosquitto needs hardly any resources for that.
MQTT is a lightweight protocol through which devices publish and subscribe to messages on topics: a sensor reports the temperature, and Home Assistant or Node-RED react to it. Eclipse Mosquitto is a widely used open-source broker for this. The panel installs Mosquitto 2, opens port 1883 and creates a user with the name you chose and a generated password; the broker rejects anonymous connections from the start. Retained messages and persistent sessions survive a restart. There is no web interface – you connect your clients directly to the IP address and port 1883. Important: out of the box, MQTT runs without TLS encryption.
- DDoS Protection
- Location — Frankfurt DE-CIX
- Storage — NVMe Ceph HA
Features
All Benefits at a Glance
Full root access — install anything
Install any software, any runtime, any version — no restrictions from panels or shared hosting.
Low latency — Frankfurt DE-CIX
Located directly at DE-CIX in Frankfurt for low latency to European networks.
Enterprise DDoS protection included
Permanent protection with high-capacity filtering — included free with every server.
Full SSH root access
Connect anytime via SSH and manage your server with full administrator privileges.
VXLAN private networks
Connect multiple servers in an isolated VXLAN Layer 2 network — separated from the internet and without public IPs.
Runs continuously — no sleep mode
No sleep mode and no shutdown when idle: your server keeps running as long as its term is paid.
Always included
Included with every root server
All Root Server Packages
Choose the package that best fits your project
Every one of these packages meets the minimum requirements of Mosquitto.
RootPaket-1
Recommended4,99€ Monthly
- 1 AMD EPYC vCores
- 4 GB DDR4 RAM
- 20 GB NVMe SSD
- 1× IPv4 + /64 IPv6
- DDoS Protection Included
RootPaket-2
5,99€ Monthly
- 2 AMD EPYC vCores
- 6 GB DDR4 RAM
- 50 GB NVMe SSD
- 1× IPv4 + /64 IPv6
- DDoS Protection Included
RootPaket-3
9,99€ Monthly
- 4 AMD EPYC vCores
- 16 GB DDR4 RAM
- 80 GB NVMe SSD
- 1× IPv4 + /64 IPv6
- DDoS Protection Included
RootPaket-4
19,69€ Monthly
- 6 AMD EPYC vCores
- 24 GB DDR4 RAM
- 130 GB NVMe SSD
- 1× IPv4 + /64 IPv6
- DDoS Protection Included
RootPaket-5
30,49€ Monthly
- 8 AMD EPYC vCores
- 32 GB DDR4 RAM
- 180 GB NVMe SSD
- 1× IPv4 + /64 IPv6
- DDoS Protection Included
RootPaket-6
46,79€ Monthly
- 8 AMD EPYC vCores
- 48 GB DDR4 RAM
- 200 GB NVMe SSD
- 1× IPv4 + /64 IPv6
- DDoS Protection Included
Get Started in 3 Steps
Get Started in 3 Steps
Order a root server – even the smallest package will do
Pick Mosquitto under “Apps” in the panel and enter a username
Enter the server IP, port 1883 and your login in your MQTT client or Home Assistant
- Admin account created during the install
- The install usually takes about 1 minutes
- Runs on Ubuntu, Debian, AlmaLinux and Rocky Linux
More one-click apps: Vaultwarden · Nginx Proxy Manager · authentik · Headscale · SearXNG · MeshCentral · CrowdSec · Tailscale · WireGuard (wg-easy) · WordPress
Frequently Asked Questions
Answers to the most important questions
How do I connect Home Assistant?
Is the connection encrypted?
Can I create several users?
Is there a web interface?
Get Started Now
Your MQTT broker on your own server – from €4.99 a month.